Plate with rollers for bush hammering
- Plate with counterplate springs.
- Three gr.30 rollers for bush hammering.
- 125mm diameter.
Plate with rollers for bush hammering
- Plate with counterplate springs.
- Three gr.30 rollers for bush hammering.
- 125mm diameter.
Detailed description
Plate with rollers for bush hammering, with springs and counter plate. It consists of 3 rollers gr. 30, 125mm diameter and M14 connection.
Bush hammering plate with rollers for use in manual polishers and bush hammering for all types of stone. It allows to make anti-slip strips with a minimum width of approximately 45 mm.
Allows easy adjustment of the bush hammer width in three positions
Formed by 3 rollers of 30 points.
Characteristics:
Diameter: 125mm.
Coupling: M-14 Female
Optimum working revolutions: 1,500 r.p.m. (a harder stone less revolutions)
Attention: This pad is designed for professional polishers with electronic regulation. During work, do not exert excessive pressure on the plate.
