Dry polishing plate with 7 steps.
The process of polishing stone and giving it shine is a gradual work that requires the progressive and staggered use of different grains. Depending on the state of the stone and the finish that you want to give it, we can start with a coarser grain (50) or an intermediate one and go up little by little until we get the shine we want.

On white surfaces or very light stones, it is recommended to work with few revolutions (approximately half of the usual ones) and slightly moisten the surface to be polished with a cloth or sponge to prevent the sandpaper from "burning" and slightly darkening the polished surface.

The pack includes the following grains:

• 50/ 100 / 200 / 400 / 800 / 1500 y 3000

Measures:

Diameters: 100mm
Shaft: 20mm.
Thickness: 2mm.

Recommended working speed between 3,000 and 5,000 r.p.m.

Note: The color of the sandpaper may vary from that reflected in the photo.