Brik-Cen MS TRANSPARENT
- Crystal effect adhesive.
- Completely transparent.
- Fast dry.
New generation MS polymer elastic sealant, moisture curing.
- Application temperature +5⁰C to +40 ⁰C
- Temperature resistance -40⁰C to + 90 ⁰C
- Good adhesion on wet surfaces
- Inside/outside gluing
- Inner sealing
- High quality
- Resistance to aging
- Low odor
- Permanent elasticity
- Solvent free
- Free of isocyanates
- Ideal for bonding where a completely transparent application is required.
- Sealing of partitions and glazing indoors.
- Pasted decorative elements.
Excellent adhesion on:
Concrete, brick, wood, exposed brick, natural or artificial stone, ceramics, glass, metals such as aluminum, iron, zinc, galvanized, etc., most thermoplastic plastics
(except polyethylene or PTFE) or thermosetting. Good adhesion on wet surfaces.
If a primer is necessary to improve adhesion, the following is recommended:
BRIK-CEN S-3195 for non-porous surfacesBRIK-CEN S-4007 for porous surfaces
- Tensile strength: 150 kg.
- Flexible: 300%
- Skin formation: 15 min.
- Shore hardness: 40kg/10 cm2 (DIN 53504)