What is STARBAND?
STARBAND is based on the great abrasive power of diamond bands (much higher than that of circular sandpaper) to obtain a perfect finish in approximately 5 times less time.
It incorporates several modulesmade up of an initial band to create a perfect angle on the edge, a second finer-grain polishing band, a disc to remove vertical scratches followed by a third brightening band and a bevel.
STARBAND
5 DIFFERENT MODELS CHOOSE YOURS!
Ancho de piezas de pulido hasta 120cm.
Mesa de Entrada y Salida de 2m.
Automatic extendable
Suitable for all types of materials
Piece thicknesses from 0.5 cm to 4.5 cm
No part length limitation
Possibility of expanding the width of the piece by 1m
Possibility of giving matte finishes
New sensors with greater precision
Double strap
Automatic movement of the piece
Automatic speed regulation
Pressure regulation according to materials
Entry and Exit Table of 2m.
Extensible automática.
Apta para todo tipo de materiales.
Espesores de pieza de 0,5cm hasta 4,5cm.
Sin limitación de largo de pieza.
Posibilidad de ampliar el ancho de pieza 1m.
Posibilidad de dar acabados mate.
Nuevos sensores con mayor precisión.
Doble correa.
Mesa de Entrada y Salida de 2m.
Mesa de Entrada y Salida de 2m.
Extensible automática.
Apta para todo tipo de materiales.
Espesores de pieza de 0,5cm hasta 4,5cm.
Sin limitación de largo de pieza.
Posibilidad de ampliar el ancho de pieza 1m.
Posibilidad de dar acabados mate.
Nuevos sensores con mayor precisión.
Doble correa.
Width of pieces
up to
120cm.
2m Entry and Exit Table
.
Automatic extendable
Suitable for all types of materials
Piece thicknesses from 0.5 cm to 4.5 cm
No part length limitation
Possibility of expanding the width of the piece by 1m
Possibility of giving matte finishes
New sensors with greater precision
Double strap
Automatic movement of the piece
Automatic speed regulation
Pressure regulation according to materials
Extensible automática.
Apta para todo tipo de materiales.
Espesores de pieza de 0,5cm hasta 4,5cm.
Sin limitación de largo de pieza.
Posibilidad de ampliar el ancho de pieza 1m.
Posibilidad de dar acabados mate.
Nuevos sensores con mayor precisión.
Doble correa.
Mesa de Entrada y Salida de 2m.
Mesa de Entrada y Salida de 2m.
Extensible automática.
Apta para todo tipo de materiales.
Espesores de pieza de 0,5cm hasta 4,5cm.
Sin limitación de largo de pieza.
Posibilidad de ampliar el ancho de pieza 1m.
Posibilidad de dar acabados mate.
Nuevos sensores con mayor precisión.
Doble correa.
Width of polishing pieces up to 120cm.
Entry and Exit Table of 1m.
Ancho de piezas de pulido hasta 120cm.
Mesa de Entrada y Salida de 2m.
Automatic extendable
Suitable for all types of materials
Piece thicknesses from 0.5 cm to 4.5 cm
No part length limitation
Possibility of expanding the width of the piece by 1m
Possibility of giving matte finishes
New sensors with greater precision
Double strap
Automatic movement of the piece
Automatic speed regulation
Pressure regulation according to materials
Extensible automática.
Apta para todo tipo de materiales.
Espesores de pieza de 0,5cm hasta 4,5cm.
Sin limitación de largo de pieza.
Posibilidad de ampliar el ancho de pieza 1m.
Posibilidad de dar acabados mate.
Nuevos sensores con mayor precisión.
Doble correa.
Mesa de Entrada y Salida de 2m.
Mesa de Entrada y Salida de 2m.
Extensible automática.
Apta para todo tipo de materiales.
Espesores de pieza de 0,5cm hasta 4,5cm.
Sin limitación de largo de pieza.
Posibilidad de ampliar el ancho de pieza 1m.
Posibilidad de dar acabados mate.
Nuevos sensores con mayor precisión.
Doble correa.
Width of polishing pieces up to 72cm.
Entry and Exit Table of 2m.
Ancho de piezas de pulido hasta 120cm.
Mesa de Entrada y Salida de 2m.
Automatic extendable
Suitable for all types of materials
Piece thicknesses from 0.5 cm to 4.5 cm
No part length limitation
Possibility of expanding the width of the piece by 1m
Possibility of giving matte finishes
New sensors with greater precision
Double strap
Automatic movement of the piece
Automatic speed regulation
Pressure regulation according to materials
Entry and Exit Table of 1m.
Extensible automática.
Apta para todo tipo de materiales.
Espesores de pieza de 0,5cm hasta 4,5cm.
Sin limitación de largo de pieza.
Posibilidad de ampliar el ancho de pieza 1m.
Posibilidad de dar acabados mate.
Nuevos sensores con mayor precisión.
Doble correa.
Mesa de Entrada y Salida de 2m.
Mesa de Entrada y Salida de 2m.
Extensible automática.
Apta para todo tipo de materiales.
Espesores de pieza de 0,5cm hasta 4,5cm.
Sin limitación de largo de pieza.
Posibilidad de ampliar el ancho de pieza 1m.
Posibilidad de dar acabados mate.
Nuevos sensores con mayor precisión.
Doble correa.
TYPES OF SANDPAPER
Its superiority over other machines on the market is based on the high abrasive power of diamond bands, much higher than that of circular sandpaper.
The finish that we achieve with Starband S3 does not leave marks at the entrance or exit, thanks to the flatness of its bands. Simply, it is perfect.
Sandpaper 1
This initial band helps us to make a perfect angle on the edge of the piece.
Sandpaper 2
Finest grain polishing band.
Streak killer
Sandpaper 3
Bezel
CONNECTIONS
Three-phase electricity
16A-6h / 200/346V 240/415V
Water
Fast water connection
Air connection
Male 1/4″
PRACTICAL
CASES
Polishment of finished pieces
Manual polishment of small pieces
Polishment of small pieces
PARALLEL SYSTEM
AUTOMATIC/EXTENDABLE
–>
Starband S3 is the best solution for edge polishing of small parts which can come directly out of the cutter for the Starband and their polishing is finished without having to return to the cutter, thus increasing operator productivity. Its great versatility admits all types of pieces, regardless of their size. Its use is versatile and valid for all materials: marble, granite, porcelain, silestone and quartz agglomerate.
An adaptable machine, which has the possibility of incorporating various accessories according to the needs of each client. It also allows to regulate the speed of the automatic and its interior is made entirely of stainless steel.
TECHNICAL
SPECS
4kv
Electrical
power
400v
Supply voltage
7 bar
Pneumatic supply pressure
7 bar
Belt modules turning speed
Water recirculation
Not recommended
Mesh 300
Water inlet filter
400kg
Approximate machine weight
Water
Grinding disc cooling
80mm
Sanding belt width
125mm
Disc diameter 90º
125mm
Bezel disc diameter
45º
High quality multipurpose grease
Belt power transmission
Recommended
725x1200x3350mm
Measures
TECHNICAL
SPECS
4kv
Electrical
power
400v
Supply voltage
7 bar
Pneumatic supply pressure
7 bar
Belt modules turning speed
Water recirculation
Not recommended
Mesh 300
Water inlet filter
400kg
Approximate machine weight
Water
Grinding disc cooling
80mm
Sanding belt width
125mm
Disc diameter 90º
125mm
Bezel disc diameter
45º
High quality multipurpose grease
Belt power transmission
Recommended
725x1200x3350mm
Measures
FREQUENTLY ASKED
QUESTIONS
What materials can I polish?
What finish does it leave?
Matte finishes
In the stripping head we can put sandpaper of different granumetry to leave a matte finish, including brush-type sandpaper for an aged finish.
Maintenance
Is infrastructure needed for the installation?
Second bevel
Largo de las piezas
Advantages of circular sanding belts
Do I need qualified staff?
Air consumption and air pressure
Water consumption
Electrical consumtion
Dust removal
CLIENTS
RATING
“When they explained to us the operation and possibilities of STARBAND S3, we saw clearly that it could greatly reduce the time it takes to make small parts and finish small trims.
Very intuitive and easy to use. In a few minutes the operator is already getting a good performance from the machine and the band allows us a superior speed and finish to that given by traditional manual work. Also emphasize the low cost of maintenance and high duration of the bands.”
“It is a machine so easy to operate thatqualified personnel are not necessary to use it. Simple in appearance but very effective, perfect for polishing edges at high speed,especially tops and skirting boards, saving time and increasing productivity.”
