cm/min
Perfect polish without the need for repetitions.
CRAZY EDGE
The most effective abrasive on the market, provides the highest polishing quality, guarantees perfect finishes without scratches at the beginning and the end of the piece. Something common in other abrasives.
CRAZY EDGE
The most effective abrasive on the market, provides the highest polishing quality, guarantees perfect finishes without scratches at the beginning and the end of the piece. Something common in other abrasives.
MARKET
COMPARISON
The Crazy Edge polishing disc with patented technology offers a 66% increase in production compared to other abrasives, achieving perfect and better quality with a much lower production cost.
POLISHING SPEED X3
Polishing capacity up to 280cm/min
PERFECT ENTRIES AND EXITS
No abrasive scratches and uniform color
100% PERFECT POLISH
Guarantees a perfect finish on every material on the market
COST EFFECTIVENESS
Practical case calculated in 2000 linear meters of useful life of the abrasive, according to real study in different clients. With an electrical consumption of 0.13 kW/hour, consumption of 20 kW = €2.6/h
CONVENTIONAL SANDING 70CM/MIN
Work completed in 47 hours of use at €25/h
- OPERATING COST €1190
- ELECTRICAL COST 122,20€
- ABRASIVE COST €30×6=€180
CRAZY EDGE 280CM/MIN
Work completed in 47 hours of use at €25/h
- OPERATING COST €415
- ELECTRICAL COST €41.6
- ABRASIVE COST 66×6=€396
CONVENTIONAL SANDING 70CM/MIN
Work completed in 47 hours of use at €25/h
- OPERATING COST €1190
- ELECTRICAL COST 122,20€
- ABRASIVE COST €30×6=€180
REAL COST €1492
CRAZY EDGE 280CM/MIN
Work completed in 47 hours of use at €25/h
- OPERATING COST €415
- ELECTRICAL COST €41.6
- ABRASIVE COST 66×6=€396
REAL COST €832
REAL COST €1492
REAL COST €832
SAVINGS OF 44% ON THE COST OF POLISHING WITH CRAZY EDGE
INCREASE IN PRODUCTION X3
PRACTICAL
CASES
Abrasive mounting
Polishing quality
TECHNICAL
SPECS
140mm
Single diameter
50, 100, 200, 500, 1000, 1500, 2000, 3000 & BUFF.
Grain
TECHNICAL
SPECS
140mm
Single diameter
50, 100, 200, 500, 1000, 1500, 2000, 3000 & BUFF.
Grain
POLISHING QUALITY
- No abrasive scratches, providing uniform color.
- Guarantees 100% perfect polishing on any material.
- Its exclusive design allows a polishing speed of up to 280cm/min with perfect entries and exits.
- Crazy Edge allows you to reduce the cost of polishing by 44%, tripling production and achieving perfect finishes.
FREQUENTLY ASKED
QUESTIONS
What is the recommended grain combination?
Depending on the number of heads we can offer different combinations.
For 4 heads, we recommend 200, 500, 1000 and 2000.
For 5 heads, we recommend 100, 200, 500, 1000 and 2000.
For 6 heads we recommend 100, 200, 500, 1000, 1500 and 2000.
For 7 heads we recommend 100, 200, 500, 1000, 1500, 2000 and BUFF.
For 8 heads we recommend 100, 200, 500, 500, 1000, 1500, 2000 and BUFF.
Is this abrasive valid for quartz agglomerate?
This abrasive stands out especially in quartz agglomerate, most traditional abrasives tend to burn this material. With the Crazy Edge we recommend finishing at 2000 grit to ensure a perfect shine without burning the resin of the quartz agglomerate.
What is the performance of this abrasive?
The performance of this abrasive is similar to conventional ones, but given its special manufacture, you will never have to repeat the polishing.
I want to polish a deep black. Does this abrasive offer the desired color?
For dark granites, even if they are tinted, the last BUFF position is recommended, with this last position we offer 100 points of brightness in the edge polishing. A superior shine to the face.
I have a shadow in the center of the polish with my usual abrasives. Why is this?
This is due to the rigidity of the abrasive used, with the Crazy Edge we generate an eccentric movement, which eliminates imperfections in the cut and adapts to the flatness of the edge. Guaranteeing a perfect polish.